Techno Press

Home

Editor-in-Chief (Asia-Pacific)
Prof. Yong San Yoon

Dept. of Mechanical Engineering
KAIST, Korea

Managing Editor-in-Chief
Professor Chang-Koon Choi

    Dept. of Civil & Environmental Engineering
    Korea Adv. Inst. of Science & Technol.
    Daejeon 305-701, Korea

ISSN: 2465-927X (Print) ISSN: 2586-7237 (Online)

Vol. 2(4 issues) for 2019, Quarterly

Aims and Scope

The Advances in Automotive Engineering (AAE), An international Journal, a peer-reviewed International Journal, reports the original contributions in automotive engineering, its applications, and related researches. These areas are evolving and rapidly growing fields attracting more engineers and specialists in several branches. The journal aims at providing a forum of excellence, based on a widely disseminated publication, for all researchers interested in this interdisciplinary and promising area of engineering and applied sciences. The journal may covers :

• Vehicles and components, • Design and analysis, • Manufacturing and recycling, • Vehicle dynamics, • Modeling simulation visualization, • Safety reliability, • Environmental impact, • Energy storing and retrieval, • Hybrid/Electric vehicle, • Human-vehicle system, • Navigation, Auto pilot, • Assistive technology, • Maintenance, • Vehicles and components test, • Other relevant topics.

Editorial Board
	Dr. David Baglee Univ. of Sunderland Sunderland SR1 3SD, UK Prof. Mohamed Sabry Amin El-Morsy Helwan Univ. Masaken Elhelmia, Cairo, Egypt Dr. Bernard Fryskowski Warsaw Univ. of Technology 00-661 Warszawa, Poland Dr. Zhiming Gao National Transportation Research Center Knoxville, TN 37932, USA Prof. Yaser Kiani Shahrekord Univ. Shahrekord, Iran Dr. Bin Li Concordia Univ. Montreal, QC H4B 1R6, Canada Prof. Shengbo Eben LI Tsinghua Univ. 30 Shuangqing Rd, China Prof. Yongle Li Southwest Jiaotong Univ. Sichuan 610031, China Dr. Moises Jimenez Martinez Volkswagen de Mexico, Tech. Develop. Mexico Dr. Simona Silvia Merola Istituto Motori - Nat'l Res. Council of Naples Piazzale Aldo Moro, 7, Rome, Italy		Prof. Andrea Mura Politecnico di Torino. 10129 Torino,Italy Prof. Ferruh Ozturk Uludag Univ. 16059 Nilufer/Bursa, Turkey Prof. Yannick Perez Helmholtz-Zentrum fur Umweltforschung 04318 Leipzig, Germany Prof. Jaroslaw Pytka Lublin Univ. of Technol. 20-618 Lublin, Poland Dr. Mohammad Reza Safaei Univ. of Malaya 50603 Kuala Lumpur, Malaysia Prof. Aref M.A. Soliman Benha Univ. Benha, Governorate 13511, Egypt Dr. Guangyong Sun University of Sydney Australia Dr. Fitri Yakub Univ. Teknologi Malaysia Malaysian Japan Int'l Inst. of Technol. (MJIIT) Malaysia

Guide to Authors (Last updated: Jan 16, 2020!)

1. Submission of the paper

Authors are asked to submit manuscripts in PDF (or Latex) format electronically through the Techno-Press Manuscript Upload System (TeMUS) (http://www.techno-press.com/papers). Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[[email protected]]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers. Authors should carefully check if their paper satisfied all the requirements in the preliminary list before submission.

2. Preparation of the manuscript

General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in regular technical paper only. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 12-24 journal pages. There will be no page charges and no other fees unless the author wishes to provide an open access to his article. Authors are advised to read the details in the Authors' Guide for guide and Template.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures and tables are required to be placed at the suitable locations in the text.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Authors' Guide.

3. Review

All the submitted papers that have passed the preliminary check by the editors will undergo a rigorous peer-review process to judge their significance and originality. Those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.

4. Proofs

Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.

5. Copyright

Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Agreement of Authorship, Originality, and Copyright Transfer must be signed and submitted.

6. Ethics

General: Techno-Press applies research and publication ethics standards based on COPE's International Standards for Editors and Authors (https://publicationethics.org/node/11184). Violation of publication ethics will result in the activation of COPE flow chart. (https://publicationethics.org/guidance/Flowcharts)
Authorship: Authors are encouraged to check ICMJE's guideline for authorship. (http://www.icmje.org/icmje-recommendations.pdf). Authorship problems will be dealt with according to COPE flowcharts. (https://publicationethics.org/authorship)

7. Publication Fee

Except for open access articles, there is no page charge or article processing fee for submission and publication in this journal.

Table of Contents


		2018 Volume 1 No. 1	No.2

Subscription

2019 Subscription Rates

USD
Advances in Automotive Engineering Volume 2 (4 issues)	Print +e		Online +c		Airmail*
Institutional Subscription		320		OA	+35

Orders are accepted by calendar year only.

1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
3. Personal Subscription Rates : Please inquire at [email protected].

\| Home \| Aims and Scope \| Editorial Board \| Table of Contents \| Subscription \| Guide to Authors \|