Techno Press

Home

Editors-in-Chief
Prof. Philippe Miele

    Ecole Nationale Superieure de Chimie
    de Montpellier & IUF, 34296 Montpellier, France

    Prof. Francisco Marquez Linares

    School of Science and Technology
    University of Turabo
    Gurabo 00725, Puerto Rico

    Prof. Nasr Bensalah

    Department of Chemistry & Earth Science
    College of Arts & Science, Qatar Universtiy
    2713 Doha, State of Qatar

    Prof. Chang-Koon Choi

Korea Advanced Institute of Science & Technology
Daejeon 305-701, Korea

ISSN:2287-6316(Print) ISSN:2287-6324(Online)

Vol 7(4 issues) for 2020, Quarterly

Aims and Scope

The "Advances in Energy Research (ERi), An International Journal", aims at the valuable source of information and excellent publication channel for the international scientific community of energy research. The areas covered by the journal are research on;

- Energy and power production, distribution, and usage,
- Sustainable energy infrastructures and system reliability,
- Conventional energy and fuel sources,
- Renewable energy,
- Alternative energy (nuclear power, solar energy, hydrogen production, etc.),
- Electrochemical energy storage systems (batteries, fuel cells, capacitors, etc.),
- Energy efficiency and conservation,
- Energy policy and management,
- Energy and environment issues, and
- Other energy related topics.

Editorial Board
Dr. Ambali Saka Abdulkareem Federal U of Tech, Minna Niger State, Nigeria Prof. L. Acosta-Michlik Potsdam Inst. Climate Impact Res. 14412 Potsdam, Germany Prof. S.I. Allakhverdiev Inst. Plant Physiology, Rus. Academy of Sci. Moscow 127276, Russia Prof. R. Anand Nat Inst of Tech India Prof. C. Arbizzani Bologna University Bologna 40126, Italy Prof. Morteza M. Ardehali Amirkabir U Tech Iran Dr. L. Aye The University of Melbourne Melbourne, Australia Prof. N. Badi University of Houston Houston, TX 77004, USA Prof. P.N. Botsaris Democritus University of Thrace 69100 Komotini, Greece Prof. Atila Caglar Kastamonu U Turkey Prof. R. Carriveau University of Windsor Ontario N9B 3P4, Canada Dr. A.M. Chaparro CIEMAT 28040 Madrid, Spain Dr. K.H. Chen National Taiwan University Taipei City10617, Taiwan Prof. Q. Chen Tsinghua University Haidian 100084, China Dr. Ken Chiang RMIT University Melbourne VIC 3001, Australia Prof. Y. Demirel University of Nebraska Lincoln Lincoln, NE 68508, USA Prof. A. Salar Elahi Islamic Azad University (IAU) Tehran, Iran	Prof. Mohamed Gadi U Nottingham Nottingham, NG7 2RD, UK Dr. Fausto Garcia U Castilla-La Mancha Spain Prof. M. Zucchetti Polytec. Univ. of Eng. in Torino Turin 10129, Italy Prof. Frederic Kuznik Nat Inst Appl Sic France Dr. Jian V. Li Texas State U USA Dr. Brantley T. Liddle Asia Pacific Energy Res Centre Japan Prof. F. Liu Univ. of Texas at Arlington TX 76019, USA Prof. L. Lombardi Niccolo Cusano University Rome, Italy Prof. L. Luo Nat'l Center for Sci. Res. (CNRS) 50609, France Prof. M. McAleer Erasmus Univ. of Rotterdam Rotterdam 3000, Netherlands Prof. S.V. Mohan Indian Inst. Chemical Tech. Hyderabad 500607, India Dr. M. Abdul Mujeebu University of Dammam Al-Dammam, Kingdom of Saudi Arabia Prof. M. Ni The Hong Kong Polytechnic Univ. Kowloon, Hong Kong Prof. S. Okamoto Shimane University Matsue 690-8504, Japan Dr. Annarita Paiano Aldo Moro U of Bari Italy Prof. Zhejun Pan CSIRO Earth Sci & Resour Eng Clayton South, VIC 3169, Australia	Prof. D. Popescu Gheorghe Asachi Tech. U. Iasi 700050 Iasi, Romania Dr. N. Rajalakshmi Cntr. for Fuel Cell Tech., IIT Madras Res. Park Chennai 600 113, India Prof. J. Ran Chongqing University Chongqing 400044, China Prof. J.F. Gomes Lisbon Superior Eng. Inst. Lisbon 1959-007, Portugal Dr. Y. Himri Elec. & Gas Nat ENT (Sonelgaz) Oran 31000, Algeri Prof. A.R.K. Ismail University of Campinas Campinas 13083-970, Brazil Prof. A.M.H. Kandil Taif University Taif 21974, Saudi Arabia Prof. A. Kassem Sohag University Governorate, Egypt Dr. S.H. Rhee Seoul Nat'l University Seoul 151-742, Korea Dr. S. K. Tyagi SSS-Nat Inst of Renew Energy India Prof. F. Wen Zhejiang University Hangzhou 310027, China Prof. Dongfang Yang Lakehead U Canada Prof. Paolo Zagaglia U Bologna Italy

Guide to Authors (Last updated: Jan 16, 2020!)

1. Submission of the paper

Authors are asked to submit manuscripts in PDF (or Latex) format electronically through the Techno-Press Manuscript Upload System (TeMUS) (http://www.techno-press.com/papers). Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[[email protected]]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers. Authors should carefully check if their paper satisfied all the requirements in the preliminary list before submission.

2. Preparation of the manuscript

General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in regular technical paper only. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 12-24 journal pages. There will be no page charges and no other fees unless the author wishes to provide an open access to his article. Authors are advised to read the details in the Authors' Guide for guide and Template.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures and tables are required to be placed at the suitable locations in the text.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Authors' Guide.

3. Review

All the submitted papers that have passed the preliminary check by the editors will undergo a rigorous peer-review process to judge their significance and originality. Those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.

4. Proofs

Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.

5. Copyright

Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Agreement of Authorship, Originality, and Copyright Transfer must be signed and submitted.

6. Ethics

General: Techno-Press applies research and publication ethics standards based on COPE's International Standards for Editors and Authors (https://publicationethics.org/node/11184). Violation of publication ethics will result in the activation of COPE flow chart. (https://publicationethics.org/guidance/Flowcharts)
Authorship: Authors are encouraged to check ICMJE's guideline for authorship. (http://www.icmje.org/icmje-recommendations.pdf). Authorship problems will be dealt with according to COPE flowcharts. (https://publicationethics.org/authorship)

7. Publication Fee

Except for open access articles, there is no page charge or article processing fee for submission and publication in this journal.

Table of Contents


		2020 Volume 7 No. 1	No.2
		2019 Volume 6 No. 1	No.2
		2017 Volume 5 No. 1	No.2 No.3 No.4
		2016 Volume 4 No. 1	No.2 No.3 No.4
		2015 Volume 3 No. 1	No.2 No.3 No.4
		2014 Volume 2 No. 1	No.2
		2013 Volume 1 No. 1	No.2

Subscription

2020 Subscription Rates

USD
Advances in Energy Research Volume 7 (4 issues)	Print +e		Online +c		Airmail*
Institutional Subscription		320		300	+35

Orders are accepted by calendar year only.

1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
3. Personal Subscription Rates : Please inquire at [email protected].

\| Home \| Aims and Scope \| Editorial Board \| Table of Contents \| Subscription \| Guide to Authors \|